AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |
Back to Blog
![]() ![]() You no longer have to create RAID-0 virtual disks for each drive since that does not work with S2D at all. ![]() If you are in a cluster and it still won't add the drive, destroy the cluster and recreated it again. MegaRAID SAS 6Gb/s OS Support Matrix Updated 12/22/10 FTP : 9260 (all port counts) Solutions Brief: The Real World Education is a business. You need to install the JBOD controller using the LSI Mega Storage Manager. Added MegaRAID Storage Manager description for the LSI SAS2208 and LSI SAS3108. Added the meaning of suffixes in RAID controller card names. There are two drives for this SAS controller: one RAID and one JBOD. Updated GUI screenshots for the LSI SAS3108 to match firmware 4.660.00-8102 or later, and added new parameters. If you still see them as RAID drives, then you might have the wrong WINDOWS 2016 driver. Windows will see them as SAS bus type with HDD or SSD. You simply just add drives to the drive slots, and Windows 2016 will see them now. Once you do that, you are like in HBA mode. Once you upgraded the firmware, you can go inside it and enable the card to be in JBOD mode, and change the personality of the card from RAID-MODE to JBOD-MODE. You can't update it with any of the existing LSI drivers since it will cause problems. Apparently, this is a special controller that can handle 12 drives, and it is only available for SuperMicro. Update: I got this resolved after much headache.įirst of all, you have to download the firmware from SuperMicro for this Avago 3108 raid controller. ![]()
0 Comments
Read More
Leave a Reply. |